Only Vac-Con uses the simplicity of a hydrostatic drive to power both the vacuum and water systems with a single engine. Both systems can be independently operated for multiple applications, while allowing for maximum flexibility. Looking for a single-engine machine? Vac-Con’s unique design offers the best value without sacrificing performance, power or ease of operation.
Available in:
Vacuum System (as specified by Model Number)
Vacuum Drive: Hydrostatic - Required
3/16" Corten® Steel Debris Tank - (size as specified by model number)
Full opening rear door
Hydraulic rear door locks, with door grabber and safety latch
5” (127mm) Butterfly valve with 10’ (3.05m) layflat hose
Debris tank Dumping: minimum 50°, hydraulic scissors lift - power up/power down
Polyethylene water tank
Automatic Vacuum Breaker and overfill protection
8” (203.2mm) vacuum intake hose
Boom travel tie down
4 Way hydraulic boom with 270° rotation and joystick controls
Front mounted 600' (182.88m) capacity 1" (25.4mm) hose / hydraulic hose reel
FMC Water Pump is standard on Single Engine unit: 60 GPM (227.13) LPM) / 2000 PSI (137.90 bar) system
Water pump drive: Hydrostatic
400’ (121.92) high pressure jet rodder hose, 1” (25.4mm) or 3/4” (19.05mm)
Manual hose rewind guide
Hose guide (Tiger Tail)
30" (762mm) leader hose
20 GPM (75.71 LPM) / 600 PSI (41.37 bar) wash down hand gun with 25’ of hose and nozzle
Sealed and locking tool box(es) {as indicated by model number}
1) each sanitary and penetrator nozzles
20.5' (6.25m) aluminum intake pipe (1-3', 1-5', 1-6', and 1-6.5' nozzle)
ICC lighting
Polyurethane Paint
